10 COIL HUMBUCKER FOR 5 STRING MM FACTORY TYPE BASS

MM factory type 10 coil pickup
MM factory type 10 coil pickup

PRICE £250

Designed as a replacement for MM Factory type Bass Guitars. Featuring full Earth shielding & 10 individual Hand Scatter wound, (reverse wound, reverse polarity), matched coils . The Pickup is very quiet in operation with an absolute minimum of cross talk between strings.

Wired directly as a full Humbucker , the pickup has a near transparent bass response , giving a precise, full & detailed tone. Wired as 2 pseudo single coils, produces a slightly brighter response with a sweetness , exceptional clarity & definition with minimum noise.

This pickup is suited to higher quality Instruments as the tone woods used in a Bass Guitar play a big part in the overall tonal qualities with a pickup of this type fitted..

Connects directly to the MM factory electronics or can be wired passively.

PLEASE NOTE: The 10 coil pickup sits deeper in a Bass Guitar than a standard MM type Humbucker . Instruments require a pickup cavity with a minimum 26mm depth to use the 10 coil pickup. To use this type of pickup in a standard Instrument, may require a reworking of the pickup cavity to a greater depth, this pickup is highly suited to hand made Bass guitars & Franken-Basses using existing Necks & Bodies of a high build quality.

SPEC.

Individual Neodymium rare earth Magnets

Hand scatter wound coils with 42 AWG plain enamel wire 22 K.Ohm output D.C

5 point wiring on all 3 model options;

Option 1. full Humbucking 10 coils + 2x pseudo single (5) coil outputs

Option 2. split 10 coil with all 10 coils / Split-p & reverse Split-p outputs =maximum tonal flexibility

Option 3. 1 Humbucker per string NOTE* this version can only be used with an active coil balancing pre-amp* 

Wax saturated (potted) against Microphonic feedback & fully Resin potted to protect the delicate internals.

Standard Coil Magnet polarities Front: South, Rear:  North

Handmade covers with many colour options as standard.

 

DIMENSIONS.

MM Factory type only.

Length 112 mm  Width 50 mm Height 25.5 mm

Screw spacings: 103 mm

Pole spacings: 1-5 = 66.9 mm 

PRICE  £250